GCM is all about Service and High End Manufacturing

You have been redirected to this page because the product that you were looking for was not found.
Welcome to the all new GCM #tinytrucks Shopping website. Please have a look around for items available for purchase and remember to use the SEARCH bar on the top right.

GCM #tinytrucks and GCM Racing is a day operated business located in the Eastern Timezone in North America. We are open for from 9am to 4pm Eastern Time from Monday to Friday.

Our Customer Service E-mail can be used 24 hours, 7 days a week, and we will respond to most or all e-mails within 48 hours depending on volume.



Call: (613)-797-8525
GCM Racing
Arnprior, Ontario
Canada

GCM Chassis - Factory Built Image
We build lots of stuff: Full scale trucks, Custom chassis setups, 3d printed parts, and many Slider chassis setups.
In this section you'll find our hand built chassis offerings, all our setups, lovingly built by GCM, and ready for you to finish.
 
DELTA Factory Built Slider Chassis Pre-Order Image
C$857.00

DELTA Factory Built Slider Chassis Pre-Order
Built and ready for you to finish

TMX CMAX XJ Slider-Factory Built Pre-Order Image
C$895.00

TMX CMAX XJ Slider-Factory Built Pre-Order
The whole thing, finished by you

TMX CMAX Leaf Slider-Factory Built Pre-Order Image
C$895.00

TMX CMAX Leaf Slider-Factory Built Pre-Order
The whole thing, finished by you

CMAX Rover Slider-Factory Built Pre-Order Image
C$895.00

CMAX Rover Slider-Factory Built Pre-Order
The whole thing, finished by you

CMAX Defender 110 Slider-Factory Built Pre-Order Image
C$895.00

CMAX Defender 110 Slider-Factory Built Pre-Order
The whole thing, finished by you

CMAX Defender 90 Slider-Factory Built Pre-Order Image
C$895.00

CMAX Defender 90 Slider-Factory Built Pre-Order
The whole thing, finished by you

CMAX LC70 Slider-Factory Built Pre-Order Image
C$895.00

CMAX LC70 Slider-Factory Built Pre-Order
The whole thing, finished by you

CMAX 152 Slider-Factory Built Pre-Order Image
C$895.00

CMAX 152 Slider-Factory Built Pre-Order
The whole thing, finished by you

DELTΔ Chassis Parts and Kits Image
It's all new. It's designed to be competitive. It's intended for 3 wheelbase settings. It's GCM.

DELTΔ is an all new platform for shorter wheelbase trucks. We've aimed it at competitive geometry, low center of gravity, and fully scaled drivetrain. The best combination of small, strong, and predictability.
 
DELTA -Info Page- Image
C$0.01
 

DELTA -Info Page-
LINKS for DELTA Builds

DELTA Chassis Slider KIT Pre-Order Image
C$857.00

DELTA Chassis Slider KIT Pre-Order
Scale, Performance, Short wheelbase

DELTA Chassis Basic KIT Pre-Order Image
C$457.00
DELTA TMX Axle Set Pre-Order Image
C$299.00

DELTA TMX Axle Set Pre-Order
Complete axles ready to roll

DELTA Servo Mount Image
C$33.00

DELTA Servo Mount
Fits DELTA Chassis

DELTA Short Wheelbase 252mm Links Image
C$12.00

DELTA Short Wheelbase 252mm Links
Conversion Links for DELTΔ

CMAX Chassis Parts and Kits Image
This chassis has been developed to offer exceptional scale performance and huge adjustability, and it's also got setups available for Link front and Link rear to assemble individually or together. Either in the 4x4 version, there's wheelbase adjustment, and spring hanger settings to get your wheelbase perfect, and match the stance of your build.

The GCM CMAX Chassis parts and Combo Kits are a scale and tough leaf spring OR Coil component set that will assemble a strong and reliable truck frame and drivetrain to look great and keep repairs out of the schedule.

CMAX houses a full scale driveline including dropped front axle outputs at the right or left side, and included overdrive front axle Tcase.
 
CMAX Instructions and Videos Image
C$0.01
 

CMAX Instructions and Videos
CMAX INFO PAGE IS HERE!

CMAX Ultimate 79 Leaf Spring Kit Image
C$466.00

CMAX Ultimate 79 Leaf Spring Kit
Front and Rear regular 79mm mounts

CMAX Ultimate Coil Spring Kit Image
C$466.00

CMAX Ultimate Coil Spring Kit
The only Scale Coil and Shock 4x4 setup right here

CMAX Ultimate Bronco Kit Image
C$829.00
 

CMAX Ultimate Bronco Kit
James Duff Long Arm and Leaf out back

CMAX Ultimate XJ-MJ Jeep Kit Image
C$466.00

CMAX Ultimate XJ-MJ Jeep Kit
Scale Coil and Shock 4x4 with Leaf out back

CMAX Ultimate 66 Leaf Kit Image
C$466.00

CMAX Ultimate 66 Leaf Kit
Narrow 66mm front leafs, regular 79mm rears

CMAX Ultimate LC70 Toyota Kit Image
C$466.00

CMAX Ultimate LC70 Toyota Kit
Scale Radius Arm and Shock 4x4 with Leaf out back

CMAX Ultimate Defender Kit Image
C$466.00

CMAX Ultimate Defender Kit
Scale Radius Arm Coil springs all around

CMAX Chassis Basic Combo Kit Image
C$379.00

CMAX Chassis Basic Combo Kit
Starting setup for your 4x4 truck build

CMAX Chassis Starter Kit Image
C$139.00

CMAX Chassis Starter Kit
Just the Basics to get something started!

CMAX Frame Rail Pair Image
C$79.00

CMAX Frame Rail Pair
A simple swap for a new build

CMAX Frame Extension Kit Image
C$106.00

CMAX Frame Extension Kit
Make it LONG with this kit

CMAX Bracket and Brace Set Image
C$64.00

CMAX Bracket and Brace Set
The middle of your CMAX frame setup

CMAX Side Link Plate Set Image
C$34.00

CMAX Side Link Plate Set
Want link suspension on your CMAX?

CMAX Bronco Radius Arm Mount Image
C$23.00

CMAX Bronco Radius Arm Mount
Fits CMAX Bronco JD Long Arms

CMAX Toyota/Defender Radius Arms Image
C$44.00

CMAX Toyota/Defender Radius Arms
Fits CMAX and LC 70 and Defender

CMAX Frame Coil Bucket Set Image
C$42.00

CMAX Frame Coil Bucket Set
Coil Spring Buckets for CMAX

CMAX Tiny Shock Mounts Image
C$21.00

CMAX Tiny Shock Mounts
Fits CMAX with Leaf Springs

CMAX 79 Front Leaf Spring Mounts Image
C$34.00

CMAX 79 Front Leaf Spring Mounts
Fits CMAX with regular 79mm Leaf Springs

CMAX 66 Front Leaf Spring Mounts Image
C$34.00

CMAX 66 Front Leaf Spring Mounts
Fits CMAX with narrow 66mm Leaf Springs

CMAX Rear Leaf Spring Mounts Image
C$34.00

CMAX Rear Leaf Spring Mounts
Fits CMAX with Leaf Springs

CMAX Bronco Radius Arms Kit Image
C$196.00
 

CMAX Bronco Radius Arms Kit
JD Long Arms for CMAX Bronco

CMAX TM8 Front Link Set Image
C$35.00

CMAX TM8 Front Link Set
Front Link set for CMAX

CMAX TM8 Rear Link Set 330mm Image
C$35.00

CMAX TM8 Rear Link Set 330mm
Rear Link set for CMAX

CMAX TM8 Rear Link Set 308mm Image
C$35.00

CMAX TM8 Rear Link Set 308mm
Rear Link set for CMAX

CMAX TM8 Rear Link Set 277mm Image
C$35.00

CMAX TM8 Rear Link Set 277mm
Rear Link set for CMAX

CMAX TMX Steering Links Image
C$17.00

CMAX TMX Steering Links
Fits CMAX and BowHouse Knuckles

CMAX 152 Yota Steering Links Image
C$17.00

CMAX 152 Yota Steering Links
Fits CMAX and 152 Axle

J2 Skeleton Chassis Parts and Kits Image
Making a strong come-back in 2020!!

Here's where you'll find the Combos and parts for the J2 Skeleton Chassis lineup. There's rails, mounts, skids, J2 Link kits, and more!
Check out the Ultimate Combo Lineup for the J2 Skeleton Chassis. This setup will be a direct fit for your Skeleton Chassis with the specific Axle you want to hang under it! Links, brackets, and all is included on the Ultimate combo setups.

For less complete kits, there's still the Combo Kit, as well as individual items to complete a previously started build.
 
J2 TMX ULTIMATE Combo Image
C$329.00
 

J2 TMX ULTIMATE Combo
For TMX Axles under a 2dr JK

J2 SCX2 ULTIMATE Combo Image
C$329.00
 

J2 SCX2 ULTIMATE Combo
For SCX2 Axles under a 2dr JK

J2 RC4WD ULTIMATE Combo Image
C$339.00
 

J2 RC4WD ULTIMATE Combo
For RC4wd Axles under a 2dr JK

J2 Skeleton Basic Chassis Combo Image
C$265.00
 

J2 Skeleton Basic Chassis Combo
Hang your body and legs on this great scale truck frame.

J2 Skeleton Starter Kit Image
C$183.00
 

J2 Skeleton Starter Kit
Just the Basics to get something started!

Skeleton Servo Mount Image
C$36.00

Skeleton Servo Mount
Fits Skeleton Chassis

Skeleton Delrin Skid Plate Image
C$36.00

Skeleton Delrin Skid Plate
Fits Skeleton Chassis

K44 Panhard 3rd Link Kit Image
C$36.00

K44 Panhard 3rd Link Kit
Fits Skeleton Chassis and K44/Yota axles

Skeleton Panhard Bracket Image
C$9.00

Skeleton Panhard Bracket
Frame side mount for custom links

J2-TMX Steering Links Image
C$17.00

J2-TMX Steering Links
Fits Skeleton and TMX

J2-TMX-Steel Link Kit Image
C$48.00

J2-TMX-Steel Link Kit
Direct bolt on HD Links for your Skeleton Chassis

J2-RC4wd-Steel Link Kit Image
C$48.00

J2-RC4wd-Steel Link Kit
Direct bolt on HD Links for your Skeleton Chassis

J2-SCX2-Steel Link Kit Image
C$48.00

J2-SCX2-Steel Link Kit
Direct bolt on HD Links for your Skeleton Chassis

TMX and NC Truck Axle Parts Image
We love SLS nylon axle housings and have been using these since 2014! This is a section showing the parts for each axle housing we service.
 
TMX Axle Information and Videos Image
C$0.01
 

TMX Axle Information and Videos
The new TerraMod full of GCM.

TMX Axles Hardware Kit Image
C$220.00

TMX Axles Hardware Kit
Everything for TMX Axles Inside

NC 170 Axles Hardware Kit Image
C$220.00

NC 170 Axles Hardware Kit
Everything for NC 170 Axles Inside

NC 172 Rover Axles Hardware Kit Image
C$220.00

NC 172 Rover Axles Hardware Kit
Everything for 172 Rover Axles Inside

Yota 152 Axles Hardware Kit Image
C$220.00

Yota 152 Axles Hardware Kit
Everything for both 152 Axles Insides

TMX CVD and Shafts Image
C$52.00

TMX CVD and Shafts
Front and Rear TMX Axle shafts

Rover 172 CVD and Shafts Image
C$52.00

Rover 172 CVD and Shafts
Front and Rear 172 Axle shafts

NC 170 CVD and Shafts Image
C$52.00

NC 170 CVD and Shafts
Front and Rear 170 Axle shafts

NC 152 CVD and Shafts Image
C$52.00

NC 152 CVD and Shafts
Front and Rear 152 and 157 Axle shafts

Tamiya 1/14 Semi Trucks Image
Tamiya makes amazing scale trucks for the 1/14 size semi truck and trailer hobby, and we're adding some more scale realism and performance to the trucks with these great parts.
 
LRT Scale Trans for Tamiya Semi Image
C$185.00
Element RC Parts Image
Element RC was begun by the great team at Associated, and their rig has been a trail crusher! We love this platform for the quality of components and value, and have developed some parts to make it even better.
 
Enduro Scale Trans Conversion Kit Image
C$288.00

Enduro Scale Trans Conversion Kit
Includes Trans, Tcase, Servo and Mounts

Enduro Servo Bumper Mount Image
C$36.00

Enduro Servo Bumper Mount
Solid one piece Aluminum

Enduro LRT2 Mounts Kit Image
C$36.00

Enduro LRT2 Mounts Kit
Trans and Tcase mounts set

SCX-10 Truck Stuff Image
From Custom SCX builds, to stocker upgrades, GCM has parts and Combos that will get you driving fast with maximum performance. Check out these complete SCX upgrade kits, as well as a great line of performance upgrade parts.
 
SCX Trans Conversion Kit Image
C$288.00

SCX Trans Conversion Kit
Trans, Tcase, Mounts, INCLUDED!

SCX LRT Trans Mount Kit Image
C$38.00

SCX LRT Trans Mount Kit
Direct fit for any SCX, all scale.

SCX1 Mounts Combo Kit Image
C$151.00
 

SCX1 Mounts Combo Kit
Mounts for Servo, Motor, T-Case included!

SCX Servo Mount Image
C$36.00

SCX Servo Mount
Bumper and Servo Front mount for SCX

SCX Dual Front Servo Mount Image
C$36.00

SCX Dual Front Servo Mount
Dual Front Servos, No Bumper Holes

SCX1 MOTOR Mount Image
C$36.00

SCX1 MOTOR Mount
Front motor mount for SCX

TF2 and Marlin Image
TF2 and Marlin Chassis platforms from RC4wd are available worldwide and provide a solid base for scale truck building. We're adding to that building experience with these fresh items to lead your RC4wd truck down the scale drivetrain path with bolt on bits.
 
TF2 Scale Trans Conversion Kit Image
C$288.00

TF2 Scale Trans Conversion Kit
14.3:1 Gears, O/D Front output, All Steel drivetrain

TF2 Scale Trans Mounts Kit Image
C$58.00

TF2 Scale Trans Mounts Kit
Servo, Motor, Tcase, mounts all in one kit

TF2 Hugger Servo Mount Image
C$36.00

TF2 Hugger Servo Mount
Servo mounting ALL the way up front

Vaterra Ascender Trucks Image
The Vaterra Ascender has become a popular Kit and RTR, with a full steel Ladder Frame, adjustable wheel base, 2 speed options, and great scale looks. Unfortunately, there's no room for a full scale interior on the stock kit, so GCM has come up with options to correct this, as well as some of the bad link geometry. There's now full scale setup options available for this great kit through GCM, and performance gains as well!
Check out our new Leaf Spring mounts kit for the trucks in Stage 1 or Stage 2, Aluminum bumper mounts, and Bronco Bumpers, as well as a new Diff input shaft to facilitate ANY of the common 5mm driveshaft options.
 
Ascender Combo Kit Image
C$162.00
 

Ascender Combo Kit
Front motor and T-Case options for full scale

Ascender Blazer Rear Axle Truss Image
C$14.50
C$29.00
 

Ascender Blazer Rear Axle Truss
Blazer Easy Install, and new geometry

Ascender Diff Input Shaft Image
C$18.00

Ascender Diff Input Shaft
Get rid of the plastic shafts

Stage 1 Ascender Leaf Spring Kit Image
C$78.00
 

Stage 1 Ascender Leaf Spring Kit
Keep the rear shock tower, add leafs out back

Stage 2 Ascender Leaf Spring Kit Image
C$83.00
 

Stage 2 Ascender Leaf Spring Kit
Need a Flat floor in the back? This is the ticket!

Stage 3 Ascender Leaf Spring Kit Image
C$87.00
 

Stage 3 Ascender Leaf Spring Kit
Flat floor and Scale Shocks included!

Ascender Rear Shock Bridge Image
C$14.00
 

Ascender Rear Shock Bridge
Add to the Rear Frame for top Shock mounting

Ascender Shock Relocation Kit Image
C$39.00
 

Ascender Shock Relocation Kit
Rear Shocks Moved Out of the way For Interiors

Bronco Rear Bumper Mounts Image
C$15.00
C$30.00

Bronco Rear Bumper Mounts
Fits Ascender and Bronco Scale Bumpers

Bronco Scale Bumper Image
C$37.00
 

Bronco Scale Bumper
Solid Billet Machined, Tough, Scale

Vaterra Bronco Radius Arms Kit Image
C$206.00

Vaterra Bronco Radius Arms Kit
JD Long Arms for Vaterra

Bronco Scale Interior Kit Image
C$69.00

Bronco Scale Interior Kit
Full structural 3D Interior for your Vaterra

Drivetrain Parts Image
GCM Offers only the toughest Chassis and Drivetrain components to keep your scale trucks running. From TTC to Scale Comp drivers, we have you covered for maintenance free running in any conditions.


 
LRT2 Trans Combo Set Image
C$230.00

LRT2 Trans Combo Set
14.3:1 Gears, O/D Front output, All Steel drivetrain

No Slot Motor Mount Plate for LowRange Image
C$29.00
 

No Slot Motor Mount Plate for LowRange
Easy Motor Mounting the Scale Transmission

Transfer Case 1:1 Image
C$76.00

Transfer Case 1:1
Tough, Tiny, and Famous.

T-Case Shaft Set Image
C$15.00

T-Case Shaft Set
Replacement Updated Shafts Only

Beadlock Wheels and Hubs Image
For the small tire guys, we have the Mini-Mag series which will beadlock any 1.55 and 1.7 rims with full scale details and easy axle fitment.
And don't forget scale hubs to match!

 
1.9 BLANK Beadlock Rim Image
C$23.00

1.9 BLANK Beadlock Rim
Clean Aluminum Beadlock with options

1.9 BLANK 5 lug Cap Image
C$5.00

1.9 BLANK 5 lug Cap
Black Plastic Center Cap for BLANK 1.9

1.9 BLANK 5 lug Steelie Insert Image
C$9.00

1.9 BLANK 5 lug Steelie Insert
Black Plastic Center Insert for BLANK 1.9

1.9 BLANK 6 lug Steelie Insert Image
C$9.00

1.9 BLANK 6 lug Steelie Insert
Black Plastic Center Insert for BLANK 1.9

1.9 BLANK 5 lug 12 Hole Insert Image
C$9.00
 

1.9 BLANK 5 lug 12 Hole Insert
Black Plastic Center Insert for BLANK 1.9

1.9 BLANK 5 lug Turbine Insert Image
C$9.00

1.9 BLANK 5 lug Turbine Insert
Black Plastic Center Insert for BLANK 1.9

Mini-Mag 6Lug 10hole Beadlock Image
C$32.00

Mini-Mag 6Lug 10hole Beadlock
Tiny Tires and Classic Mags meet together at last

Mini-Mag 5Lug 10hole Beadlock Image
C$32.00

Mini-Mag 5Lug 10hole Beadlock
Tiny Tires and Classic Mags meet together at last

GCM SIMPLE Hub Set - Black Image
C$23.00
 

GCM SIMPLE Hub Set - Black
Clean and easy Front and Rear axle hubs

GCM SIMPLE Hub Set - Silver Image
C$17.00
 

GCM SIMPLE Hub Set - Silver
Clean and easy Front and Rear axle hubs

Axial SMT Monster Jam and Yeti Image
Not much can stop the Axial Yeti and SMT trucks. These dirt eaters are super fun with open diffs and allow tons of power upgrades! We have some serious reliability upgrades for these trucks.

At GCM we pick only the most needed upgrades, only the best, the toughest are available here.
 
Axial Yeti SMT Diff Cup Image
C$37.00
 

Axial Yeti SMT Diff Cup
Billet, Tuned, Tough, Better

Vaterra Twin Hammer Buggy Image
The new addition of the Vaterra Twin Hammer to the scale buggy market has been exciting! GCM has taken the VTH to the next level with our scale parts and performance enhancing additions, to bring your Hammer to a realistic and competitive level.

Check out the Twin Hammers Product Videos
Here at this link.

All of our Twin Hammer body and interior parts are now available at our GCM Racing ShapeWays store Here at this link ! You may be able to save on shipping and order time by using this method for ordering.
 
VTH Front Tower Plate Image
C$73.00

VTH Front Tower Plate
Performance and Scale in one Mod.

VTH Rear Axle Truss Image
C$33.00
 

VTH Rear Axle Truss
Fix the Twist with this little part.

VTH Scale Interior Kit Image
C$91.00
 

VTH Scale Interior Kit
Full Scale Details, and Takes a Beating

VTH Rock Buggy Roof Image
C$58.00
 

VTH Rock Buggy Roof
Designed to Scale, Made to Last

VTH Rock Buggy Hood Image
C$49.00
 

VTH Rock Buggy Hood
A Tough new Front Look for your Hammer

SSD-RC Mini-Store Image
GCM is pleased to offer quality parts and designs from SSD-RC in the UK.

SSD-RC currently offers beadlock wheels, AR60 upgrades, and Axial Yeti and SCX parts as well. Stay watch for new items for Ascenders and check out the general scale items also!
 
Trail King Chassis Kit - SSD300 Pre-Order Image
C$517.65
C$609.00
1.55" Steel D hole Black Wheels - SSD097 Image
C$52.00

1.55" Steel D hole Black Wheels - SSD097
Hex Mounted Beadlocks, Black Finish

1.9" Steel D Black Wheels - SSD003 Image
C$52.00

1.9" Steel D Black Wheels - SSD003
Hex Mounted Beadlocks, Black Finish

1.9" Steel Trail Silver Wheels - SSD079 Image
C$52.00

1.9" Steel Trail Silver Wheels - SSD079
Hex Mounted Beadlocks, Silver Finish

1.9" Steel Trail Black Wheels - SSD076 Image
C$52.00
 

1.9" Steel Trail Black Wheels - SSD076
Hex Mounted Beadlocks, Black Finish

1.9 Steel 8 Spoke Beadlock Wheels (White) - SSD251 Image
C$52.00
1.9 Steel 8 Spoke Beadlock Wheels (Black) - SSD254 Image
C$52.00
 
1.9" Steel Silver Stock Wheels - SSD278 Image
C$47.00
1.9" Steel Black Stock Wheels - SSD280 Image
C$47.00
 
1.9" Steel Chrome Slot Wheels - SSD276 Image
C$47.00
1.9" Steel Silver Slot Wheels - SSD272 Image
C$47.00
1.9" Steel Black Slot Wheels - SSD274 Image
C$47.00
1.9" Steel Silver 8 Hole Wheels - SSD266 Image
C$47.00
1.9" Steel Black 8 Hole Wheels - SSD268 Image
C$47.00
 
1.9" Contender Wheels Bronze - SSD233 Image
C$79.00
 

1.9" Contender Wheels Bronze - SSD233
All aluminum machined rims

1.9" Contender Wheels Grey - SSD264 Image
C$79.00

1.9" Contender Wheels Grey - SSD264
Machined Aluminum Beadlocks

1.9" Rock Racer Silver Wheels - SSD275 Image
C$79.00

1.9" Rock Racer Silver Wheels - SSD275
Machined Aluminum Beadlocks

1.9 Double Time Wheels - SSD142 Image
C$79.00

1.9 Double Time Wheels - SSD142
Aluminum Machined and amazing!

BLACK 1.9 Rugged Beadlocks - SSD322 Image
C$69.00
 

BLACK 1.9 Rugged Beadlocks - SSD322
Machined and Ready for action

SILVER 1.9 Rugged Beadlocks - SSD324 Image
C$69.00

SILVER 1.9 Rugged Beadlocks - SSD324
Machined and Ready for action

1.9" Blue Aluminum Rings - SSD267 Image
C$12.00
 

1.9" Blue Aluminum Rings - SSD267
Machined Aluminum Rings

1.9" Red Aluminum Rings - SSD271 Image
C$12.00
 

1.9" Red Aluminum Rings - SSD271
Machined Aluminum Rings

Rotor Hubs +0mm SSD192 Image
C$16.50
 

Rotor Hubs +0mm SSD192
Fits SSD Wheels

Rotor Hubs +3mm SSD194 Image
C$16.50
 

Rotor Hubs +3mm SSD194
Fits SSD Wheels

Brass Wheel Hubs +2mm - SSD279 Image
C$27.00
Rotor Hubs +6mm SSD231 Image
C$16.50
 

Rotor Hubs +6mm SSD231
Fits SSD Wheels

M2 x 5 Scale Hex Bolts - SSD028 Image
C$7.70

M2 x 5 Scale Hex Bolts - SSD028
Hex hardware for SSD Beadlocks

Black M2 Scale Hex Bolts - SSD372 Image
C$7.70

Black M2 Scale Hex Bolts - SSD372
Hex hardware for SSD Beadlocks or any scale build

Silver M2 Scale Hex Bolts - SSD369 Image
C$7.70

Silver M2 Scale Hex Bolts - SSD369
Hex hardware for SSD Beadlocks or scale detail

Tool for Hex Bolts - SSD053 Image
C$12.00

Tool for Hex Bolts - SSD053
Hex tool for tiny bolts

Scale Locking Hubs Yellow - SSD014 Image
C$21.00

Scale Locking Hubs Yellow - SSD014
4mm Thread for most Scale Trucks

Scale Locking Hubs Red - SSD011 Image
C$21.00
 

Scale Locking Hubs Red - SSD011
4mm Thread for most Scale Trucks

Scale Locking Hubs Blue - SSD007 Image
C$21.00

Scale Locking Hubs Blue - SSD007
4mm Thread for most Scale Trucks

Scale Rear Hubs (black) - SSD178 Image
C$16.00
 

Scale Rear Hubs (black) - SSD178
4mm Thread for most Scale Trucks

Scale Rear Hubs (silver) - SSD253 Image
C$16.00
 

Scale Rear Hubs (silver) - SSD253
4mm Thread for most Scale Trucks

Scale Hub Tool - SSD008 Image
C$9.50
 

Scale Hub Tool - SSD008
Installation tool for SSD Hubs

Axles for Widening Kit - SSD022 Image
C$14.00

Axles for Widening Kit - SSD022
Replacements for SSD018

Yeti Trailing Arm Kit - SSD048 Image
C$52.00
 

Yeti Trailing Arm Kit - SSD048
Solid aluminum with rebuildable rod ends

Rod ends for Trailing Arm Kit - SSD050 Image
C$10.00
Skid for Diamond Axle - SSD054 Image
C$21.00
 

Skid for Diamond Axle - SSD054
Fits all Diamond Axle Housing items

Scale Yeti/RR10 Drive Shaft- SSD073 Image
C$43.00

Scale Yeti/RR10 Drive Shaft- SSD073
Steel Slider, Tough Universal

HD D60 Diff cover - SSD261 Image
C$35.00

HD D60 Diff cover - SSD261
Fits Wraith and SMT

Output for HRT Trans - SSD034 Image
C$12.00

Output for HRT Trans - SSD034
Replacement Output shaft for SSD016

HD D60 Centered Rear Axle - SSD179 Image
C$39.00

HD D60 Centered Rear Axle - SSD179
Strong Plastic in HD for Wraith/SMT/Yeti

Shafts for Centered Wraith Rear Axle - SSD040 Image
C$28.00
 

Shafts for Centered Wraith Rear Axle - SSD040
Replacement shafts for centered housing

RR10 Pro C Hubs Black- SSD103 Image
C$42.00

RR10 Pro C Hubs Black- SSD103
Solid Billet Black C Hubs for RR10 and Wraith

RR10 Pro Knuckles Black- SSD101 Image
C$42.00

RR10 Pro Knuckles Black- SSD101
Solid Billet Black Knuckles for RR10 and Wraith

Diamond Axle Link Mounts - SSD259 Image
C$18.50

Diamond Axle Link Mounts - SSD259
Fits Wraith and Yeti from Axial

HD Bomber Knuckles Black- SSD184 Image
C$39.00

HD Bomber Knuckles Black- SSD184
Double Shear, Black finish

HD Bomber Knuckles Orange- SSD186 Image
C$39.00

HD Bomber Knuckles Orange- SSD186
Double Shear, Orange finish

Ti Upper Links - SSD137 Image
C$24.00

Ti Upper Links - SSD137
Fits RR10, SMT, Yeti

Scale Wraith Drive Shaft- SSD077 Image
C$43.00
 

Scale Wraith Drive Shaft- SSD077
Steel Slider, Tough Universal

Hawse Fairlead - SSD013 Image
C$16.00

Hawse Fairlead - SSD013
Winch fairlead in Black

D60 Aluminum Bearing Cap - SSD065 Image
C$12.00

D60 Aluminum Bearing Cap - SSD065
Replaces plastic D60 part

D60 Servo Mount Plate- SSD057 Image
C$7.00

D60 Servo Mount Plate- SSD057
Front Axle Servo mounting for 4 link

HD D60 Diff Cover- SSD092 Image
C$28.00

HD D60 Diff Cover- SSD092
HD Black aluminum replacement cover

SCX Pro C Hubs Black- SSD068 Image
C$42.00

SCX Pro C Hubs Black- SSD068
Solid Billet Black C Hubs for SCX

Scale SCX/RR10 Drive Shaft- SSD089 Image
C$43.00
 

Scale SCX/RR10 Drive Shaft- SSD089
Steel Slider, Tough Universal

Chrome Front Bumper Ascender - SSD031 Image
C$71.00
 
Chrome Rear Bumper Ascender - SSD033 Image
C$76.00

Chrome Rear Bumper Ascender - SSD033
Machined Chrome Aluminum

Ascender Short Sliders - SSD143 Image
C$56.00

Ascender Short Sliders - SSD143
Fits Ascender Wheelbase 2 setting

M3 Short Rod Ends - SSD020 Image
C$7.00
 

M3 Short Rod Ends - SSD020
for M3 Thread, Steel Ball included

M3 Bent Rod Ends - SSD023 Image
C$10.00

M3 Bent Rod Ends - SSD023
for M3 Thread, Steel Ball included

M3 Long Rod Ends - SSD017 Image
C$7.00

M3 Long Rod Ends - SSD017
for M3 Thread, Steel Ball included

Large Thread Rod Ends - SSD116 Image
C$3.00
C$10.00

Large Thread Rod Ends - SSD116
for M4 Thread, Steel Ball included

M4 Rod End Spacers - SSD151 Image
C$10.00
 

M4 Rod End Spacers - SSD151
Adjust links with Solid Rings

Servo Horn 25t - SSD134 Image
C$13.00

Servo Horn 25t - SSD134
Clamping, Futaba-SCX 25t fitment

SCX2 Diff Cover Black - SSD127 Image
C$28.00

SCX2 Diff Cover Black - SSD127
Solid Diff Protection in Black

SCX2 Diff Cover Silver - SSD130 Image
C$28.00

SCX2 Diff Cover Silver - SSD130
Solid Diff Protection in Black

SCX2 Black Link Mounts - SSD159 Image
C$24.00
 

SCX2 Black Link Mounts - SSD159
No flex link mounts in Black

SCX2 Black C Hubs - SSD145 Image
C$42.00

SCX2 Black C Hubs - SSD145
Clamping and clockable beef.

SCX2 Black Knuckles - SSD144 Image
C$42.00
 

SCX2 Black Knuckles - SSD144
Black Aluminum solid performance

SCX2 Brass Knuckles - SSD193 Image
C$58.00
 

SCX2 Brass Knuckles - SSD193
Heavy Brass and solid

SCX2 Front Shock Hoops - SSD191 Image
C$45.00
 

SCX2 Front Shock Hoops - SSD191
Aluminum, Black, Ready to go

SCX2 Rear Shock Hoops - SSD380 Image
C$41.00
 

SCX2 Rear Shock Hoops - SSD380
Aluminum, Black, Ready to go

SCX2 Brass Axle Weights - SSD140 Image
C$33.00

SCX2 Brass Axle Weights - SSD140
Fits SSD Lockout and Knuckle

SCX2 Black Rear Lockouts - SSD146 Image
C$39.00

SCX2 Black Rear Lockouts - SSD146
for AR44 Axle housings

SCX2 Kit Trans 2 speed - SSD131 Image
C$78.00

SCX2 Kit Trans 2 speed - SSD131
Upgrade your Kit trans to double shift

SCX2 Kit Tcase Gear Set - SSD135 Image
C$28.00

SCX2 Kit Tcase Gear Set - SSD135
Machined and super strong

SCX2 Wide Rear Bumper - SSD174 Image
C$52.00

SCX2 Wide Rear Bumper - SSD174
Replaces SCX2 XJ Rear Bumper

SCX Trans Gears - SSD172 Image
C$39.00
 

SCX Trans Gears - SSD172
For ALL Axial 3 Gear Transmissions

Uni Shafts for SCX2 - SSD325 Image
C$48.00
 

Uni Shafts for SCX2 - SSD325
Hardened Steel, fits SCX2 Front Axles

Offset Uni Shafts for TrailKing - SSD313 Image
C$48.00
 

Offset Uni Shafts for TrailKing - SSD313
OFFSET Hardened Steel, fits SCX2 Front Axles

HD CVD Axle for SCX2- SSD219 Image
C$59.00
 

HD CVD Axle for SCX2- SSD219
Fits SCX2 and Diamond/Pro44 axles

SCX2 Rear Axle Shafts - SSD218 Image
C$16.50

SCX2 Rear Axle Shafts - SSD218
Machined and Hardened

SCX2 Steel Locker - SSD196 Image
C$13.00

SCX2 Steel Locker - SSD196
fits SCX2 and Pro44

SCX2 GearSet - SSD181 Image
C$24.50

SCX2 GearSet - SSD181
fits SCX2 and Pro44

SCX2 Overdrive GearSet - SSD349 Image
C$34.00
 

SCX2 Overdrive GearSet - SSD349
fits SCX2, Trail King, and Pro44

Pro44 Front Axle Case - SSD207 Image
C$32.00
 

Pro44 Front Axle Case - SSD207
4x the weight, fits SCX2

Pro44 Rear Axle Case - SSD209 Image
C$32.00

Pro44 Rear Axle Case - SSD209
4x the weight, fits SCX2

Pro44 Metal Cover - SSD227 Image
C$12.00
 

Pro44 Metal Cover - SSD227
Replacement for SSD Pro Housing

Silver Pro44 Metal Cover - SSD214 Image
C$12.00

Silver Pro44 Metal Cover - SSD214
Replacement for SSD Pro Housing

Pro44 Main Housing - SSD225 Image
C$16.80

Pro44 Main Housing - SSD225
Replacement for SSD Pro Housing

Diamond Front Axle Case - SSD211 Image
C$32.00
 

Diamond Front Axle Case - SSD211
4x the weight, fits SCX2

Diamond Rear Axle Case - SSD213 Image
C$32.00
 

Diamond Rear Axle Case - SSD213
4x the weight, fits SCX2

Diamond Main Housing - SSD226 Image
C$16.80
 

Diamond Main Housing - SSD226
Replacement for SSD Pro Housing

Front Tubes for SCX2 Pro Axle - SSD229 Image
C$22.00

Front Tubes for SCX2 Pro Axle - SSD229
Replacement for SSD Pro Housing

Rear Tubes for SCX2 Pro Axle - SSD230 Image
C$22.00

Rear Tubes for SCX2 Pro Axle - SSD230
Replacement for SSD Pro Housing

Black Front Winch Bumper - SSD215 Image
C$52.00

Black Front Winch Bumper - SSD215
fits TRX4 front and SCX2

Narrow Front Winch Bumper - SSD235 Image
C$79.00

Narrow Front Winch Bumper - SSD235
fits TRX4 front and SCX2

D110 Front Bumper TRX4 - SSD203 Image
C$19.00
 

D110 Front Bumper TRX4 - SSD203
fits TRX4 front and SCX2

D110 Rear Bumper TRX4 - SSD205 Image
C$39.00
 
TRX Servo Horn - SSD224 Image
C$8.00

TRX Servo Horn - SSD224
4x the weight, fits SCX2

Brass Portal Covers for TRX4 - SSD198 Image
C$51.00
 

Brass Portal Covers for TRX4 - SSD198
Heavy portal strength and performance

12mm Hex for TRX4 - SSD202 Image
C$13.00
 

12mm Hex for TRX4 - SSD202
fits regular 1.9 wheels on TRX4

Bronco Front Bumper - SSD277 Image
C$49.00
 
Bronco Winch Bumper Black - SSD269 Image
C$77.00
TRX4 Bronco Rear Bumper - SSD283 Image
C$52.00
 
Scale Steel Short Driveshaft for TRX-4 - SSD255 Image
C$43.00

Scale Steel Short Driveshaft for TRX-4 - SSD255
Fits TRX Front and SCX Kit Front

Scale Steel Long Driveshaft for TRX-4 - SSD257 Image
C$43.00
Scale Steel Driveshaft for RockRey - SSD260 Image
C$43.00
Enduro Brass Knuckles - SSD357 Image
C$54.00
 

Enduro Brass Knuckles - SSD357
Black Chromed and Machined

C-Hubs for Enduro - SSD376 Image
C$41.00
 
Enduro Link Mounts - SSD360 Image
C$21.00
Brass Enduro Link Mounts - SSD363 Image
C$27.00
M4 Driveshaft Pin - SSD237 Image
C$4.00

M4 Driveshaft Pin - SSD237
Replacement for many driveshafts

90mm Shocks -Pair - SSD301 Image
C$49.90
 

90mm Shocks -Pair - SSD301
Black and silver all Aluminum

C-Hubs for Venture - SSD262 Image
C$42.00
Gen8 Bumper Adapters - SSD319 Image
C$11.00
Gen8 Front Link Mounts - SSD323 Image
C$23.00
Gen8 Rear Link Mounts - SSD321 Image
C$21.00
Wraith 1.9 Bumper Mount - SSD328 Image
C$16.50

Wraith 1.9 Bumper Mount - SSD328
Machined black aluminum

Wraith 1.9 Chassis Brace - SSD330 Image
C$27.00

Wraith 1.9 Chassis Brace - SSD330
Machined black aluminum

LaTrax Rally 1/18 Image
This new popular racer is good for hours of fun and serious competition in it's class, all on a small budget.
GCM has come up with a common break replacement to help you run longer.
 
LaTrax Left Bellcrank Image
C$12.00

LaTrax Left Bellcrank
Bulletproof replacement, direct fit

Shirts and Stickers Image
We've got some GCM sticker packs and all sizes of shirts to decorate you and your rigs!
 
GCM Racing Toque Hats -Black Image
C$20.00
 

GCM Racing Toque Hats -Black
Quality stuff for your head

GCM Racing Toque Hats -Grey Image
C$20.00
 

GCM Racing Toque Hats -Grey
Quality stuff for your head