There are no items in your cart.
* Made to order. Possible 3 week shipping delay *
Factory Built, by our GCM Team, this 'Slider' chassis includes a long list of great features, and fits well under the TeamRaffee Defender 90 hardbody, and many others. This chassis boasts proper Radius Arm and coil front end, and a coil spring and separate oil filled damper rear suspension to match. We use BowHouse RC axle housings for this build. Check this spec list below.
Pre-Built and included:
1x Full CMAX Rover Ultimate Kit, 275mm wheelbase setting.
1x installed all metal LRT2 transmission and Tcase with OD front axle output
1x front right drop Radius Arm BHRC nylon axle housing complete
1x rear Coil/Shock BHRC nylon axle housing complete
Full steering links installed on BowHouse RC double shear knuckles
Front coil springs and rear coil springs
4x oil filled shock dampers
2x steel driveshafts
Motor pinion gear for 1/8 size motor shaft
Tech Specs:
Wheelbase: adjustable
Axle width, outside of hex to hex: 173mm
Wheel travel at hex: 23mm
Final drive ratio, 26.5:1 with included pinion gear
Requires:
Rims and tires
Body and mounts specific to the CMAX
Electronics of choice
Recommended items:
55t brushed motor or
1900KV brushless 540 size motor
3s 1500mah battery
standard 12mm beadlock rim, under 4.1 inch diameter tire
--Nylon Body Mount Items from Shapeways LINK--
Not Included:
Motor, tires, servo, electronics, or body.
Copyright © 2024 GCM Webstore Canada International