Axial 4-Link Rear Truss
Watch the assembly and setup video.
This link bolts directly to the SCX-10 axle housing and uses the stock mounting hardware. It will host your upper links in a super stiff setup that is attached right through both axle halves, and will keep your axle positions solid. The mount also raises the pivot point about 3mm from the stock Y link location to help bring the center of motion towards the center of the truck. Depending on your link's other mounting positions this can help a lot with torque twist and other traction related problems.
This product has been updated to include a new M3 tapped hole on the flat side. This lets you mount the 3rd link on the side to increase clearance for your front motor/trans setups. This mod works perfectly with our Axial Panhard kits. This part can not be used with an axle mounted servo.
Comes only in BLACK.
Please also see our Axial 3-Link Truss for Panhard setups!
