There are no items in your cart.
Here's our Defender Ultimate kit! It's got a full ladder frame, C-channel design, with a Steel geared scale driveline and transfer case, along with EPIC amounts of adjustment.
This package is perfect for the Defender builds that require the correct front radius arms and axles. The setup is specifically designed to use the BowHouse RC 164 axle housings --LINK HERE-- in the front and rear, as well as the popular ECX213000 shock set.
Scale Motors are available to slide over your 540 size motor Here at this link.
This CMAX Ultimate Kit includes all the essence of a Scale Truck build. In your package you'll find the following items:
Left and Right Chassis Rails, 19.7 inches long
Front Servo Mount
Front Frame Shock Mounts with Coil Bucket
Front Radius Arm suspension and track bar link for Bowhouse RC Axle sets
Front 540 size Motor Mount Plate
GCM LowRange Scale Transmission, Steel Gear, 14.3 Gear Ratio
LRT2 Transfer Case, 1.11 Overdrive Front Output
Transfer Case Cross Member
Frame Center Cross Member
Link Mount Chassis Plates
Frame Rear Cross Member/Rear Shock Mount
Rear Frame Shock Mounts with Coil Bucket
Includes All Hex Hardware, 12t Pinion Gear for 1/8 motor shaft, All steel drivetrain gears and shafts, and all aluminum mounts and rails.
To complete this coil spring build, we recommend:
1 CMAX Rear Link Kit for your wheelbase (in this section)
4 Coil Spring AX31442, (2 bags)
BowHouse RC Defender Radius Arm 164 Axles with Coil Bucket rear.
Our Favorites for this build:
1. We recommend ECX213000 shocks for this kit, which provide the perfect amount of travel, don't leak, and are already filled with oil. Simply remove the coil spring and spring seats, and install on the truck. Very nice little shocks.
2. We recommend Axial SCX10 shock springs for these spring cups. Many others work as well, but these are very easy to get and have multiple spring rates.
Copyright © 2023 GCM Webstore Canada International