There are no items in your cart.
This is the mounts set for using your own LRT2 in the FMS Chassis. Transmission NOT included.
*** This combo requires Leaf Spring suspension from FMS or custom made. Links for these are here: >>FMS LEAF SPRINGS<< ****
This kit includes:
1x rear trans mount, using the stock skidplate mount holes.
2x mount blocks for the LRT motor mount.
All the hardware for assembly.
The mount set fits our LRT2 Transmission and Transfer Case.
**Note: If you want to use the stock FMS driveshafts, you will need to remove 1mm off the output shafts for the LRT2 transfer case. Simply grind, mill, or sand off the shaft tip where the driveshaft goes on. The FMS Driveshafts are very tight on the ball end. **
Copyright © 2025 GCM Webstore Canada International