** Welcome to GCM Canada! **

VTH Front Tower Plate

VTH Front Tower Plate Image
Detail Image
Detail Image
Detail Image
Detail Image

**Please read this tip here to change your 90mm Axial to 85mm for the Twin Hammer Tower Plate upgrade >> Twin Hammer and GCM Shock Tip << **

Check out the Twin Hammers Product Videos Here at this link.

This simple Front Tower Plate from GCM lets you use upright front shocks, at full travel, and brings a whole ton of new performance advantages to the Twin Hammer.
With the new front plate, replacing the cantilever shocks and top brace, you will have ample room up front to get your battery and even some electronics up and forward, all of which helps a ton with the balance and performance of this rig.
Because the GCM plate is the only mod on the market that supports the front bumper on the TH, the front hood tube work doesn't have any structural function any more, and this allows for a simple hood hinge using all stock parts.. In fact, the GCM Front Tower Plate has shock hoops that are designed to capture the hood tube work as a latch! There's no need for any hardware at all to open or close the hood with this mod!
The Plate also includes a few new holes up front, just in front of the tower hoops, and you can mount winches, light buckets, D ring loops, or your own custom tubing! Just about anything can work on these extra mount holes, making sure you get the custom rig you are looking for, with function and scale looks at the same time.
Another sweet advantage of this setup is the designed geometry. Using popular SCX-10 shocks, dropped right on the Twin Hammer, you get the full suspension swing and it's ready to ride. We highly recommend the Axial versions, as they offer the proper shock travel, Measured eye to eye at 85mm open and 60mm compressed. This measurement offers the exact full suspension travel of the Twin Hammer. If your favorite shocks are a bit too long, just add an internal spacer to limit your down or up travel for the perfect setup.

Each kit includes all new hex hardware, a new front base plate, and 2 front shock hoops.

**GCM does not supply new front shocks. The kit is designed for 85mm-60mm travel shocks as shown**
Shock options:
Axial SCX stock shocks with a 5mm travel spacer added,
GMade 85-63mm Aeration Shocks
GMade 85-63mm Diaphram Shocks
RC4WD Dual Spring Shocks with a 5mm travel spacer added,
Other Custom Shocks

Your Price:C$69.00